IndianBusinessTools
← Blog

Form 3CD Clause 34(a): How to Fill the TDS Table

8 November 2026 · 7 min read

Add up each TDS section for clause 34(a) and see which figures do not match

Calculate TDS

Clause 34(a) of Form 3CD is a table of TDS, section by section. For each section it shows what you paid, what needed TDS, what tax you deducted, and what you did not deposit. The table is short, but the figures must agree with your ledgers and with Form 26AS. Most mistakes come from mixing up which payments belong in which column.

This guide is for the FY 2025-26 tax audit. Payments made up to 31 March 2026 stay under the old section names (194C, 194J and so on). Only payments from 1 April 2026 use Section 393(1) and the new payment codes.

How we checked this. We compared several published guides on clause 34. They agree on columns 4 to 9. They differ on the last columns: one lists 10 columns, and others add a column for the total tax deducted before the "not deposited" column. The form has been changed before. Use the column numbers shown in the current Form 3CD utility. This guide uses the numbering in our worksheet, which follows the form as we know it.

What clause 34 has in three parts

PartWhat it covers
34(a)The TDS and TCS table, section by section. This guide is about this part
34(b)Whether you filed your TDS statements (24Q, 26Q, 27Q, 27EQ) on time, and whether they list all transactions
34(c)Interest you owe under Section 201(1A) or 206C(7), and how much of it you paid

The 34(a) columns in plain words

You fill one row for each TDS section.

ColumnWhat it meansWhere the number comes from
1Your TANYour TDS registration
2SectionFor example 194C or 194J
3Nature of paymentFor example "payment to contractors"
4Total payment of this kind in the yearYour ledger, by section
5Out of column 4, the amount on which TDS was neededColumn 4, less payments below the limit and exempt payments
6Out of column 5, the amount on which you deducted at the normal rateYour TDS return
7The tax you deducted on column 6Your TDS return
8Out of column 5, the amount on which you deducted at a lower rateLower deduction certificates, or a wrong low rate
9The tax you deducted on column 8Your TDS return
Not deposited (11 in our worksheet)Tax you deducted but did not deposit with the governmentYour challans

Two checks hold for every row:

The gap between column 5 and columns 6 plus 8 is the amount on which no tax was deducted. This is the figure a reader of your report will look at first.

A worked example

A firm, FY 2025-26. It pays contractors under 194C and one lawyer under 194J.

194C, payments to contractors

ColumnAmountWhy
4₹12,00,000All contractor payments in the ledger
5₹10,00,000₹2,00,000 went to small contractors below the 194C limits, so it is left out
6₹8,00,000TDS deducted at 2%
7₹16,0002% of ₹8,00,000
8₹1,00,000One contractor showed a certificate for 1%
9₹1,0001% of ₹1,00,000
Not deposited₹2,000Tax deducted in March but not yet deposited

Now check it. Columns 6 and 8 add up to ₹9,00,000. Column 5 is ₹10,00,000. So ₹1,00,000 had no TDS. The firm needs the reason. If it was a missed deduction, the tax lost is ₹2,000 at 2%.

194J, professional fees

ColumnAmountWhy
4₹6,00,000All professional fees
5₹5,60,000A ₹40,000 fee to one lawyer is below the ₹50,000 limit, so it is left out
6₹5,60,000TDS deducted at 10%
7₹56,00010% of ₹5,60,000

Everything on this row agrees, so there is nothing to explain.

The TDS calculator's clause 34 mode does this adding for you, one block per section, and flags a row where the figures cannot all be true.

Where the numbers usually go wrong

  1. Booked but not paid. TDS is due at the earlier of booking or payment. A March bill that you pay in April still needs TDS in March. Count it in the year you booked it.
  2. GST in the total. If the invoice shows GST on a separate line, TDS is worked out on the amount without GST. Check which figure your ledger holds before you compare with the TDS return. See TDS on contractor payments (194C).
  3. Using the bank statement. Use the ledger by section, because the bank statement misses bills that are booked but not paid.
  4. Ledger and Form 26AS do not match. Column 7 plus column 9 should match the tax in your TDS returns. If they do not, find out why before you sign.
  5. Late deposit is not "not deposited". Tax you deposited after the due date is not tax you failed to deposit. As most guides read the form, late deposit is an interest matter, reported in clause 34(c). The "not deposited" column is for tax you deducted and never paid to the government by the time you report. Check this with your tax auditor.
  6. A small amount in the wrong section. Professional fees put under 194C get the wrong rate. Check the nature of each payment before you total it.

What a gap costs

If column 5 is higher than columns 6 and 8 together because of a mistake, three things follow:

If the reason is valid, such as a payment below the limit, write it down in your working papers.

A short plan

  1. Take the ledger totals for each TDS section for the year, by booking date.
  2. Remove payments below the limit and exempt payments to get column 5.
  3. Take columns 6 to 9 and the "not deposited" figure from your TDS returns and challans.
  4. Put each section into the clause 34 worksheet.
  5. Fix any row it flags, and find a reason for every rupee on which no tax was deducted.
  6. Copy the figures into the Form 3CD utility, and use the column numbers shown there.

Sources

This post was checked on 8 November 2026. It explains the form and is not tax advice. The column numbering of Form 3CD can change, and your tax auditor signs the report, so use the current utility and your auditor's judgement for the final figures.

Frequently asked questions

What does clause 34(a) of Form 3CD ask for?

It asks whether you had to deduct or collect tax, and if yes, a table for each TDS section. The table shows how much you paid, how much of it needed TDS, how much tax you deducted, and how much of that tax you did not deposit. Example: a firm that paid contractors and a lawyer in the year fills two rows, one for 194C and one for 194J.

Which payments go in column 5 and which stay out?

Column 5 holds only the payments on which TDS was required. A payment below the limit for that section stays out of column 5, but it stays in column 4. Example: a contractor paid ₹20,000 in one bill and ₹80,000 in the whole year is below the 194C limits of ₹30,000 a bill and ₹1,00,000 a year. That ₹80,000 is in column 4 only.

Where do I show tax deducted at a lower rate?

In columns 8 and 9. Use them when the deductor, or a lower deduction certificate, set the rate below the normal rate. Example: a firm contractor shows a certificate for 1%. You deduct 1% on ₹1,00,000, so column 8 is ₹1,00,000 and column 9 is ₹1,000.

What if I did not deduct TDS on a payment that needed it?

Then that amount is in column 5 but in neither column 6 nor column 8. Keep the reason in your working papers. If the reason is a mistake, expect interest at 1% a month under Section 201(1A), reported in clause 34(c), and a 30% disallowance of that expense under Section 40(a)(ia). Example: ₹1,00,000 to a contractor with no TDS means ₹2,000 of tax missed at 2%.

Do I show a payment that is only booked in the accounts and not yet paid?

Yes. For 194C and 194J, TDS applies at the earlier of the date you book the payment or the date you pay it. A bill booked on 28 March and paid in April still needs TDS by 31 March. Example: a lawyer's ₹50,000 fee booked in the March accounts goes in the 194J row for that year.

Found a mistake, or want a tool we don’t have? Tell us — we read every message.