IndianBusinessTools
← Blog

Fabrication Work SAC Code 9988: 9988 vs 9954, GST Rate

13 November 2026 · Updated 19 November 2026 · 6 min read

Type your service, such as fabrication or stitching, and see the SAC code and rate

Find HSN Code

Fabrication work on your client's metal uses SAC 9988. SAC means "Services Accounting Code". It is the code for services on a GST invoice. If the client gives you the steel and pays only for cutting, welding or shaping, it is job work under SAC 9988, and GST is 18% of your charge.

Two other cases look similar but use a different code:

Many workshops also get asked for an "8-digit HSN code" for job work. There is no 8-digit HSN for job work. A SAC code has 6 digits, so the longest code you can print is a 6-digit code under 9988.

To look up the exact line, use the HSN Code Finder or open the SAC 9988 page, which lists every code under the heading and the rate for each.

The ownership test: 9988, 9954 or product HSN

Ask two questions. Who owns the material? And what is the client paying you for?

Who owns the materialWhat you doWhat it isCodeGST rate
The clientCut, weld or shape it, and bill only for the workJob workSAC 998818% for metal work
YouMake the item and also fix it on the client's building or land, as one contractWorks contractA code under SAC 9954Generally 18%
YouMake the item and sell it, with no fixingSale of goodsHSN of the product, such as 7308The rate for that product

A works contract means work on a building or other immovable property (property fixed to the ground), where goods also pass to the client as part of the job. Fabrication done in your own workshop on the client's steel is not a works contract. It is job work.

What if you add small items, such as welding rods, bolts or paint? CBIC has said a job worker can use their own goods along with the client's goods (Circular 38/12/2018-GST). It is still job work. But if you buy most of the material, it is no longer job work. Ask your CA when the split is not clear.

Example: ₹20,000 fabrication charge

A client in your state sends you steel worth ₹1,00,000. You cut and weld it into frames. Your charge is ₹20,000.

ItemAmount
CodeSAC 9988
Taxable value (your charge only)₹20,000
CGST at 9%₹1,800
SGST at 9%₹1,800
Invoice total₹23,600

The ₹1,00,000 steel is not on your bill, because it still belongs to the client. If the client is in another state, charge IGST at 18% (₹3,600) in place of CGST and SGST.

What counts as job work

Job work means you work on goods that belong to someone else, and you bill for the work. Examples:

Your client is the "principal". The goods stay the principal's property. You send them back after the work, and your bill covers only your charge. For a longer explanation of the heading, see the SAC 9988 page.

GST rate on job work in 2026

The rate depends on the goods you work on, not only on the fact that it is job work. The entries are in Notification 8/2017 (Integrated Tax Rate), serial number 26. The Central Tax and State Tax notifications carry the same entries, split into CGST and SGST.

Job work onGST rate
Diamonds1.5%
Food and food products, animal feed, medicines, hides and skins5%
Textiles and textile products, tailoring5%
Printing of books, newspapers, journals5%
Bricks (those taxed at 5%), jewellery other than diamonds, handicrafts, umbrellas5%
Making alcoholic liquor for drinking18%
Everything else, including general engineering and metal fabrication18%

Some older web pages still say 12%. That was the rate before 22 September 2025, so do not copy it. Before you invoice, look at the list again for your goods. A 5% entry has conditions, and some goods are left out.

What to write on the job work invoice

  1. Code: SAC 9988. A 6-digit code under it is allowed. You do not need 8 digits.
  2. Value: only your charge for the work. Do not add the value of the client's goods.
  3. Rate: the rate for the goods you worked on, from the table above.
  4. Goods moving back and forth: the client's goods travel on a delivery challan, and an e-way bill is needed where the value is above ₹50,000. An e-way bill moves the goods. It is not your tax invoice for the job work charge. Make the challan with the Delivery Challan Generator, and read our delivery challan guide for the rules.

Quick check before you invoice

Summary

Sources

We took the rates from the rate list that powers our SAC 9988 page, which follows the rate notification (as amended up to 15/2025). We did not compare each line with the Gazette copy. The point that goods travel on a delivery challan and need an e-way bill above ₹50,000 comes from the general GST rules. We did not check every state's rules. Please check the latest text and ask your CA before you change your invoices. This is not legal advice.

Frequently asked questions

Is there an 8-digit HSN code for job work?

No. Job work is a service, so it has a SAC code, and the SAC for job work is 9988. SAC codes are 6 digits long, so the most you can print is a 6-digit code under 9988. If your buyer asks for 8 digits, that does not change the code. Use SAC 9988 when your client owns the goods and you charge only for the work.

What GST rate do I charge on fabrication job work?

18%. Fabrication on metal that your client gave you is job work under SAC 9988, and general engineering work is not on the 5% list. Example: a client sends you steel worth ₹1,00,000 and you cut and weld it for a fee of ₹20,000. GST is 18% of ₹20,000 = ₹3,600. The steel is not part of your bill, because it still belongs to the client.

When does fabrication come under SAC 9954 and not 9988?

When you supply the material yourself and also fix the structure on the client's building or land, as one contract. That is a works contract, and the code is a construction service code under SAC 9954, generally at 18%. If the client gives you the steel and pays only for cutting and welding, it stays job work under SAC 9988.

My invoice says 12% for job work. Is that right?

Not for most job work today. Some older pages and software still show 12%. That was the rate before the GST rate change of 22 September 2025. The rates now are 1.5% for diamonds, 5% for a list of goods such as textiles, food and printing, and 18% for everything else. Check the rate on your invoice template before you issue the next bill.

I buy the material myself and sell the finished goods. Is that job work?

No. That is a sale of goods, and the invoice uses the HSN code of the finished product. Job work needs the client's own goods. If you buy the material, you are the maker and the seller, not the job worker.

Found a mistake, or want a tool we don’t have? Tell us — we read every message.